客户问题

[ 7.515395] <<-GTP-INFO->> Guitar reset

[ 8.635381] rk3x-i2c fe5a0000.i2c: timeout, ipd: 0x00, state: 1

[ 9.648717] rk3x-i2c fe5a0000.i2c: timeout, ipd: 0x00, state: 1

[ 10.662049] rk3x-i2c fe5a0000.i2c: timeout, ipd: 0x00, state: 1

[ 11.675381] rk3x-i2c fe5a0000.i2c: timeout, ipd: 0x00, state: 1

[ 12.688715] rk3x-i2c fe5a0000.i2c: timeout, ipd: 0x00, state: 1

[ 12.688736] <<-GTP-INFO->> Guitar reset

[ 13.808712] rk3x-i2c fe5a0000.i2c: timeout, ipd: 0x00, state: 1

[ 14.822048] rk3x-i2c fe5a0000.i2c: timeout, ipd: 0x00, state: 1

[ 15.835380] rk3x-i2c fe5a0000.i2c: timeout, ipd: 0x00, state: 1

[ 16.848699] rk3x-i2c fe5a0000.i2c: timeout, ipd: 0x00, state: 1

[ 17.862047] rk3x-i2c fe5a0000.i2c: timeout, ipd: 0x00, state: 1

[ 17.862069] <<-GTP-INFO->> Guitar reset

[ 18.982031] rk3x-i2c fe5a0000.i2c: timeout, ipd: 0x00, state: 1

[ 19.995380] rk3x-i2c fe5a0000.i2c: timeout, ipd: 0x00, state: 1

[ 21.008698] rk3x-i2c fe5a0000.i2c: timeout, ipd: 0x00, state: 1

[ 22.022045] rk3x-i2c fe5a0000.i2c: timeout, ipd: 0x00, state: 1

[ 23.035364] rk3x-i2c fe5a0000.i2c: timeout, ipd: 0x00, state: 1

[ 23.035386] <<-GTP-INFO->> Guitar reset

[ 24.155378] rk3x-i2c fe5a0000.i2c: timeout, ipd: 0x00, state: 1

[ 25.168698] rk3x-i2c fe5a0000.i2c: timeout, ipd: 0x00, state: 1

[ 26.182045] rk3x-i2c fe5a0000.i2c: timeout, ipd: 0x00, state: 1

[ 27.195363] rk3x-i2c fe5a0000.i2c: timeout, ipd: 0x00, state: 1

[ 28.208711] rk3x-i2c fe5a0000.i2c: timeout, ipd: 0x00, state: 1

[ 28.208734] <<-GTP-INFO->> Guitar reset

[ 29.328705] rk3x-i2c fe5e0000.i2c: timeout, ipd: 0x00, state: 2

[ 30.342057] rk3x-i2c fe5e0000.i2c: timeout, ipd: 0x00, state: 1

[ 31.355364] rk3x-i2c fe5e0000.i2c: timeout, ipd: 0x00, state: 2

[ 32.368718] rk3x-i2c fe5e0000.i2c: timeout, ipd: 0x00, state: 2

[ 33.382029] rk3x-i2c fe5e0000.i2c: timeout, ipd: 0x00, state: 1

[ 34.395377] rk3x-i2c fe5e0000.i2c: timeout, ipd: 0x00, state: 1

[ 35.408695] rk3x-i2c fe5e0000.i2c: timeout, ipd: 0x00, state: 2

[ 36.422045] rk3x-i2c fe5e0000.i2c: timeout, ipd: 0x00, state: 1

[ 36.422226] rtc_hym8563 5-0051: rtc core: registered hym8563 as rtc0

[ 37.435362] rk3x-i2c fe5e0000.i2c: timeout, ipd: 0x00, state: 1

[ 37.435388] rtc_hym8563 5-0051: hctosys: unable to read the hardware clock

[ 37.437941] iommu: Adding device fdff0000.rkisp to group 7

[ 37.437981] rkisp_hw fdff0000.rkisp: Linked as a consumer to fdff1a00.iommu

[ 37.438182] rkisp_hw fdff0000.rkisp: is_thunderboot: 0

[ 37.438204] rkisp_hw fdff0000.rkisp: max input:0x0@0fps

[ 37.438236] rkisp_hw fdff0000.rkisp: can't request region for resource [mem 0xfdff0000-0xfdffffff]

[ 37.439160] rkisp rkisp-vir0: rkisp driver version: v01.07.00

[ 37.439428] rkisp rkisp-vir0: Entity type for entity rkisp-isp-subdev was not initialized!

[ 37.439457] rkisp rkisp-vir0: Entity type for entity rkisp-csi-subdev was not initialized!

[ 37.441343] usbcore: registered new interface driver uvcvideo

[ 37.441364] USB Video Class driver (1.1.1)

[ 37.441521] pps pps0: new PPS source ktimer

[ 37.441537] pps pps0: ktimer PPS source registered

[ 37.441554] pps_ldisc: PPS line discipline registered

[ 37.442345] pps pps1: new PPS source pps.-1

[ 37.442406] pps pps1: Registered IRQ 107 as PPS source

[ 37.442812] rockchip-iodomain fdc20000.syscon:io-domains: Linked as a consumer to regulator.27

[ 37.442861] rockchip-iodomain fdc20000.syscon:io-domains: pmuio2(3300000 uV) supplied by vcc3v3_pmu

[ 37.442960] rockchip-iodomain fdc20000.syscon:io-domains: Linked as a consumer to regulator.25

[ 37.443000] rockchip-iodomain fdc20000.syscon:io-domains: vccio1(3000000 uV) supplied by vccio_acodec

[ 37.443148] rockchip-iodomain fdc20000.syscon:io-domains: Linked as a consumer to regulator.26

[ 37.443189] rockchip-iodomain fdc20000.syscon:io-domains: vccio3(3300000 uV) supplied by vccio_sd

[ 37.443285] rockchip-iodomain fdc20000.syscon:io-domains: Linked as a consumer to regulator.21

[ 37.443323] rockchip-iodomain fdc20000.syscon:io-domains: vccio4(1800000 uV) supplied by vcc_1v8

[ 37.443418] rockchip-iodomain fdc20000.syscon:io-domains: Linked as a consumer to regulator.31

[ 37.443458] rockchip-iodomain fdc20000.syscon:io-domains: vccio5(3300000 uV) supplied by vcc_3v3

[ 37.443581] rockchip-iodomain fdc20000.syscon:io-domains: vccio6(1800000 uV) supplied by vcc_1v8

[ 37.443690] rockchip-iodomain fdc20000.syscon:io-domains: vccio7(3300000 uV) supplied by vcc_3v3

[ 37.447218] rockchip-thermal fe710000.tsadc: tsadc is probed successfully!

[ 37.448597] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com

[ 37.449004] Bluetooth: HCI UART driver ver 2.3

[ 37.449026] Bluetooth: HCI UART protocol H4 registered

[ 37.449040] Bluetooth: HCI UART protocol ATH3K registered

[ 37.449137] usbcore: registered new interface driver bfusb

[ 37.449217] usbcore: registered new interface driver btusb

[ 37.449563] cpu cpu0: leakage=20

[ 37.449622] cpu cpu0: pvtm = 82310, from nvmem

[ 37.449646] cpu cpu0: pvtm-volt-sel=1

[ 37.450050] cpu cpu0: Linked as a consumer to regulator.16

[ 37.450115] cpu cpu0: Dropping the link to regulator.16

[ 37.450288] cpu cpu0: Linked as a consumer to regulator.16

[ 37.451021] cpu cpu0: avs=0

[ 37.451059] energy_model: pd0: hertz/watts ratio non-monotonically decreasing: em_cap_state 1 >= em_cap_state0

[ 37.451321] cpu cpu0: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0

[ 37.451901] cpu cpu0: failed to find power_model node

[ 37.453401] sdhci: Secure Digital Host Controller Interface driver

[ 37.453419] sdhci: Copyright(c) Pierre Ossman

[ 37.453431] Synopsys Designware Multimedia Card Interface Driver

[ 37.454569] dwmmc_rockchip fe000000.dwmmc: IDMAC supports 32-bit address mode.

[ 37.454830] dwmmc_rockchip fe000000.dwmmc: Using internal DMA controller.

[ 37.454852] dwmmc_rockchip fe000000.dwmmc: Version ID is 270a

[ 37.454926] dwmmc_rockchip fe000000.dwmmc: DW MMC controller at irq 44,32 bit host data width,256 deep fifo

[ 37.455075] dwmmc_rockchip fe000000.dwmmc: allocated mmc-pwrseq

[ 37.455094] mmc_host mmc3: card is non-removable.

[ 37.672952] mmc_host mmc3: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0)

[ 37.686555] dwmmc_rockchip fe2b0000.dwmmc: IDMAC supports 32-bit address mode.

[ 37.687561] dwmmc_rockchip fe2b0000.dwmmc: Using internal DMA controller.

[ 37.687587] dwmmc_rockchip fe2b0000.dwmmc: Version ID is 270a

[ 37.687662] dwmmc_rockchip fe2b0000.dwmmc: DW MMC controller at irq 47,32 bit host data width,256 deep fifo

[ 37.687803] dwmmc_rockchip fe2b0000.dwmmc: Linked as a consumer to regulator.32

[ 37.687883] dwmmc_rockchip fe2b0000.dwmmc: Linked as a consumer to regulator.26

[ 37.695873] mmc3 mmc_send_io_op_cond err: -110

[ 37.699230] mmc_host mmc1: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0)

[ 37.712238] sdhci-pltfm: SDHCI platform and OF driver helper

[ 37.713450] mmc0: Unknown controller version (5). You may experience problems.

[ 37.745036] mmc0: SDHCI controller on fe310000.sdhci [fe310000.sdhci] using ADMA

[ 37.746594] hidraw: raw HID events driver (C) Jiri Kosina

[ 37.747410] usbcore: registered new interface driver usbhid

[ 37.747471] usbhid: USB HID core driver

[ 37.748743] rockchip,bus bus-npu: Linked as a consumer to regulator.17

[ 37.748833] rockchip,bus bus-npu: Failed to get leakage

[ 37.748983] rockchip,bus bus-npu: pvtm = 82310, from nvmem

[ 37.749055] rockchip,bus bus-npu: pvtm-volt-sel=1

[ 37.750164] rockchip,bus bus-npu: avs=0

[ 37.761035] rockchip-saradc fe720000.saradc: Linked as a consumer to regulator.28

[ 37.763400] optee: probing for conduit method from DT.

[ 37.763498] optee: revision 3.13 (48b7c13e)

[ 37.764775] optee: initialized driver

[ 37.764854] rksfc_base v1.1 2016-01-08

[ 37.766319] rksfc fe300000.sfc: rksfc_probe clk rate = 99000000

[ 37.766528] rkflash_dev_init enter

[ 37.766597] sfc nor id: 0 0 0

[ 37.766639] rkflash[1] is invalid

[ 37.766646] rkflash_dev_init enter

[ 37.766708] sfc_nand id: 0 0 0

[ 37.766742] rkflash[2] is invalid

[ 37.768034] rp_power prepare build 1 gpio

[ 37.768174] rp_power request led

[ 37.768257] success request gpio103 out

[ 37.768750] input: gpio_event as /devices/platform/rp_power/input/input1

[ 37.769469] rpdzkj wake lock

[ 37.770578] rp_gpio prepare build 5 gpio

[ 37.770697] rp_gpio request otg_idctl

[ 37.770776] success request gpio94 out

[ 37.770867] rp_gpio request spk_en

[ 37.770914] success request gpio102 out

[ 37.770999] rp_gpio request spk_mute

[ 37.771061] success request gpio99 out

[ 37.771155] rp_gpio request vdd_en

[ 37.771221] success request gpio109 out

[ 37.771305] rp_gpio request hub_rst

[ 37.771368] success request gpio95 out

[ 37.773571] usbcore: registered new interface driver snd-usb-audio

[ 37.779752] rk817-codec rk817-codec: DMA mask not set

[ 37.784148] mmc0: new HS200 MMC card at address 0001

[ 37.786069] mmcblk0: mmc0:0001 8GTF4R 7.28 GiB

[ 37.786764] mmcblk0boot0: mmc0:0001 8GTF4R partition 1 4.00 MiB

[ 37.787458] mmcblk0boot1: mmc0:0001 8GTF4R partition 2 4.00 MiB

[ 37.787700] mmcblk0rpmb: mmc0:0001 8GTF4R partition 3 512 KiB, chardev (238:0)

[ 37.792550] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8

[ 37.793859] IPVS: Registered protocols (TCP, UDP)

[ 37.793978] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)

[ 37.794112] IPVS: ipvs loaded.

[ 37.794131] IPVS: [rr] scheduler registered.

[ 37.794427] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully

[ 37.794461] Initializing XFRM netlink socket

[ 37.794979] NET: Registered protocol family 10

[ 37.796045] Segment Routing with IPv6

[ 37.796416] NET: Registered protocol family 17

[ 37.796451] NET: Registered protocol family 15

[ 37.796515] Bridge firewalling registered

[ 37.796626] can: controller area network core (rev 20170425 abi 9)

[ 37.796768] NET: Registered protocol family 29

[ 37.796788] can: raw protocol (rev 20170425)

[ 37.796800] can: broadcast manager protocol (rev 20170425 t)

[ 37.796819] can: netlink gateway (rev 20170425) max_hops=1

[ 37.797169] Bluetooth: RFCOMM socket layer initialized

[ 37.797212] Bluetooth: RFCOMM ver 1.11

[ 37.797244] Bluetooth: HIDP (Human Interface Emulation) ver 1.2

[ 37.797258] Bluetooth: HIDP socket layer initialized

[ 37.797306] 8021q: 802.1Q VLAN Support v1.8

[ 37.797339] [BT_RFKILL]: Enter rfkill_rk_init

[ 37.797352] [WLAN_RFKILL]: Enter rfkill_wlan_init

[ 37.797944] [WLAN_RFKILL]: Enter rfkill_wlan_probe

[ 37.797995] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6398s

[ 37.798009] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.

[ 37.798021] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.

[ 37.798064] [WLAN_RFKILL]: wlan_platdata_parse_dt: WIFI,host_wake_irq = 124, flags = 0.

[ 37.798082] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found !

[ 37.798093] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio

[ 37.798105] [WLAN_RFKILL]: rfkill_set_wifi_bt_power: 1

[ 37.798117] [WLAN_RFKILL]: Exit rfkill_wlan_probe

[ 37.798812] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 73.

[ 37.798844] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 148.

[ 37.798868] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 140.

[ 37.798889] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 141.

[ 37.798961] [BT_RFKILL]: Request irq for bt wakeup host

[ 37.799059] [BT_RFKILL]: ** disable irq

[ 37.799187] [BT_RFKILL]: bt_default device registered.

[ 37.799356] Key type dns_resolver registered

[ 37.799702] flash vendor_init_thread!

[ 37.799716] flash vendor storage:20170308 ret = -1

[ 37.801314] gc2093 4-0037: driver version: 00.01.02

[ 37.801612] gc2093 4-0037: 4-0037 supply dovdd not found, using dummy regulator

[ 37.801713] gc2093 4-0037: Linked as a consumer to regulator.0

[ 37.801768] gc2093 4-0037: 4-0037 supply avdd not found, using dummy regulator

[ 37.801862] gc2093 4-0037: 4-0037 supply dvdd not found, using dummy regulator

[ 37.816581] vendor storage:20190527 ret = 0

[ 37.915420] mmc_host mmc3: Bus speed (slot 0) = 375000Hz (slot req 375000Hz, actual 375000HZ div = 0)

[ 37.939628] mmc3 mmc_send_io_op_cond err: -110

[ 38.183134] mmc3 mmc_send_io_op_cond err: -110

[ 38.426790] mmc3 mmc_send_io_op_cond err: -110

[ 38.849085] rk3x-i2c fe5d0000.i2c: timeout, ipd: 0x90, state: 1

[ 38.849155] gc2093 4-0037: i2c read failed at addr: 3f0

[ 39.862377] rk3x-i2c fe5d0000.i2c: timeout, ipd: 0x80, state: 1

[ 39.862439] gc2093 4-0037: i2c read failed at addr: 3f1

[ 39.862460] gc2093 4-0037: Failed to read sensor id, (-110)

[ 39.863031] gc2093: probe of 4-0037 failed with error -110

[ 39.865689] Loading compiled-in X.509 certificates

[ 39.868308] Btrfs loaded, crc32c=crc32c-generic

[ 39.868762] pstore: Using compression: deflate

[ 39.870565] rga2: Driver loaded successfully ver:3.2.63318

[ 39.870922] rga2: Module initialized.

[ 39.900490] rockchip-drm display-subsystem: dmc is disabled

[ 39.900793] rockchip-vop2 fe040000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x2a, primary plane phy id: 5

[ 39.900820] rockchip-vop2 fe040000.vop: [drm:vop2_bind] vp1 assign plane mask: 0x15, primary plane phy id: 4

[ 39.900838] rockchip-vop2 fe040000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x0, primary plane phy id: -1

[ 39.901072] [drm] failed to init overlay plane Cluster0-win1

[ 39.901122] [drm] failed to init overlay plane Cluster1-win1

[ 39.901262] rockchip-drm display-subsystem: bound fe040000.vop (ops 0xffffff80091ac158)

[ 39.901458] dwhdmi-rockchip fe0a0000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)

[ 39.902472] dwhdmi-rockchip fe0a0000.hdmi: registered DesignWare HDMI I2C bus driver

[ 39.903939] rockchip-drm display-subsystem: bound fe0a0000.hdmi (ops 0xffffff80091afc78)

[ 39.903998] rockchip-drm display-subsystem: bound fe060000.dsi (ops 0xffffff80091b0d40)

[ 39.904015] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).

[ 39.904025] [drm] No driver support for vblank timestamp query.

[ 39.904560] rockchip-drm display-subsystem: connector[HDMI-A-1] can't found any modes

[ 39.920344] rockchip-drm display-subsystem: fb0: frame buffer device

[ 39.921108] [drm] Initialized rockchip 2.0.0 20140818 for display-subsystem on minor 0

[ 39.921883] mali fde60000.gpu: Kernel DDK version g7p1-01bet0

[ 39.921925] input: adc-keys as /devices/platform/adc-keys/input/input2

[ 39.922130] mali fde60000.gpu: Linked as a consumer to regulator.18

[ 39.922282] mali fde60000.gpu: dev_pm_opp_set_regulators: no regulator (shadercores) found: -19

[ 39.922380] mali fde60000.gpu: leakage=7

[ 39.922432] mali fde60000.gpu: pvtm = 82310, from nvmem

[ 39.922739] asoc-simple-card rk809-sound: ASoC: DAPM unknown pin Headphones

[ 39.922863] mali fde60000.gpu: avs=0

[ 39.922885] W : [File] : drivers/gpu/arm/bifrost/platform/rk/mali_kbase_config_rk.c; [Line] : 112; [Func] : kbase_platform_rk_init(); power-off-delay-ms not available.

[ 39.923239] mali fde60000.gpu: GPU identified as 0x2 arch 7.4.0 r1p0 status 0

[ 39.923312] mali fde60000.gpu: No priority control manager is configured

[ 39.923327] mali fde60000.gpu: No memory group manager is configured

[ 39.923801] mali fde60000.gpu: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 h_table=0

[ 39.924485] mali fde60000.gpu: Probed as mali0

[ 39.928057] asoc-simple-card rk809-sound: rk817-hifi <-> fe410000.i2s mapping ok

[ 39.928617] input: rockchip,rk809-codec Headphones as /devices/platform/rk809-sound/sound/card0/input3

[ 39.930152] dhd_module_init: in Dongle Host Driver, version 1.579.77.41.22 (r-20191105-2)(20191120-1)

[ 39.930176] ======== dhd_wlan_init_plat_data ========

[ 39.930187] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter

[ 39.930247] dhd_wlan_init_gpio: WL_HOST_WAKE=-1, oob_irq=110, oob_irq_flags=0x414

[ 39.930258] dhd_wlan_init_gpio: WL_REG_ON=-1

[ 39.930266] dhd_wifi_platform_load: Enter

[ 39.930276] Power-up adapter 'DHD generic adapter'

[ 39.930308] wifi_platform_set_power = 1

[ 39.930319] ======== PULL WL_REG_ON(-1) HIGH! ========

[ 39.930329] [WLAN_RFKILL]: rockchip_wifi_power: 1

[ 39.930338] [WLAN_RFKILL]: rockchip_wifi_power: toggle = false

[ 39.930347] [WLAN_RFKILL]: wifi turn on power [GPIO-1-0]

[ 39.931410] iommu: Adding device fde40000.npu to group 0

[ 39.931445] RKNPU fde40000.npu: Linked as a consumer to fde4b000.iommu

[ 39.931895] RKNPU fde40000.npu: RKNPU: rknpu iommu is enabled, using iommu mode

[ 39.932056] RKNPU fde40000.npu: Linked as a consumer to regulator.20

[ 39.932084] RKNPU fde40000.npu: can't request region for resource [mem 0xfde40000-0xfde4ffff]

[ 39.932597] [drm] Initialized rknpu 0.4.2 20210701 for fde40000.npu on minor 1

[ 39.932879] RKNPU fde40000.npu: leakage=3

[ 39.932922] RKNPU fde40000.npu: pvtm = 82310, from nvmem

[ 39.933365] RKNPU fde40000.npu: avs=0

[ 39.93393NAME=Buildroot

VERSION=2018.02-rc3-ga8f05baab-dirty

ID=bui8droot

VERSION_ID=2018.02-rc3

PRETTY_NAME="Buildroot 2018.02-rc3"

] RKNPUStarting logging: fde40000.npu: l=0 h=2147483647 hyst=5000 lOK

_limit=0 h_limit=0 h_table=0

[ 39.93/u3sr/bin/modetest

965] RKNPU fde40000.npu: failed to find power_model node

[ 39.933978] RKNPU fde40000.npu: RKNPU: failed to initialize power model

[ 39.933988] RKNPU fde40000.npu: RKNPU: failed to get dynamic-coefficient

[ 39.934458] cfg80211: Loading compiled-in X.509 certificates for regulatory database

[ 39.935715] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'

[ 39.935803] platform reguPopulating /dev using udev: latory.0: Direct firmware load for regulatory.db failed with error -2

[ 39.935817] cfg80211: failed to load regulatory.db

[ 39.936742] rockchip-pm rockchip-suspend: not set pwm-regulator-config

[ 39.937673] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 417; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '16:19:41', on 'Oct 31 2022'.

[ 39.938096] Mali:

[ 39.938098] Mali device driver loaded

[ 39.938120] rkisp rkisp-vir0: clear unready subdev num: 1

[ 39.938133] rockchip-csi2-dphy1: No link between dphy and sensor

[ 39.938511] rockchip-csi2-dphy1: No link between dphy and sensor

[ 39.938524] rkisp-vir0: update sensor failed

[ 39.938768] ALSA device list:

[ 39.938776] #0: rockchip,rk809-codec

[ 40.029408] devfreq fde60000.gpu: Couldn't update frequency transition information.

[ 40.038131] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)

[ 40.038191] VFS: Mounted root (ext4 filesystem) on device 179:6.

[ 40.040200] devtmpfs: mounted

[ 40.042894] Freeing unused kernel memory: 1728K

[ 40.062099] Run /sbin/init as init process

[ 40.075369] asoc-simple-card rk809-sound: ASoC: DAPM unknown pin Headphones

[ 40.100134] EXT4-fs (mmcblk0p6): re-mounted. Opts: (null)

[ 40.235810] wifi_platform_bus_enumerate device present 1

[ 40.235833] ======== Card detection to detect SDIO card! ========

[ 40.235844] mmc3:mmc host rescan start!

[ 40.322235] udevd[146]: starting version 3.2.7

[ 40.328143] udevd[146]: specified group 'kvm' unknown

[ 40.338102] udevd[147]: starting eudev-3.2.7

done

Initializing random number generator... done.

Will now mount all partitions in /etc/fstab

Note: Create /.skip_fsck to skip fsck

- The check might take a while if didn't shutdown properly!

Handling rootfs: /dev/mmcblk0p6 / ext2 rw,noauto 1

Checking /dev/mmcblk0p6(ext2)

[ 40.802789] EXT4-fs (mmcblk0p6): re-mounted. Opts: (null)

e2fsck 1.43.9 (8-Feb-2018)

rootfs: clean, 7384/393216 files, 140666/1572864 blocks

[ 40.831361] EXT4-fs (mmcblk0p6): re-mounted. Opts: (null)

Handling misc: /dev/mmcblk0p2 /misc emmc defaults 0

Unsupported file system emmc for /dev/mmcblk0p2

Handling oem: /dev/mmcblk0p7 /oem ext2 defaults 2

Checking /dev/mmcblk0p7(ext2)

e2fsck 1.43.9 (8-Feb-2018)

oem: clean, 18/23296 files, 15325/131072 blocks

Mounting /dev/mmcblk0p7(ext2) on /oem

[ 41.083803] EXT4-fs (mmcblk0p7): mounting ext2 file system using the ext4 subsystem

[ 41.089525] EXT4-fs (mmcblk0p7): mounted filesystem without journal. Opts: (null)

Handling userdata: /dev/mmcblk0p8 /userdata ext2 defaults 2

Checking /dev/mmcblk0p8(ext2)

e2fsck 1.43.9 (8-Feb-2018)

userdata: clean, 18/64512 files, 19277/1032172 blocks

Mounting /dev/mmcblk0p8(ext2) on /userdata

[ 41.211841] EXT4-fs (mmcblk0p8): mounting ext2 file system using the ext4 subsystem

Log saved to /tmp/mountall.log

[ 41.217297] EXT4-fs (mmcblk0p8): mounted filesystem without journal. Opts: (null)

Starting system message bus: done

/etc/init.d/S36load_wifi_modules: line 43: can't create /sys/class/rfkill/rfkill1/state: nonexistent directory

insmod: can't insert '/system/lib/modules/bcmdhd.ko': No such file or directory

Starting network: OK

Starting dhcpcd...

dev: loaded udev

no interfaces have a carrier

forked to background, child pid 566

[ 41.472116] Generic PHY stmmac-1:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=stmmac-1:00, irq=POLL)

[ 41.484640] dwmac4: Master AXI performs any burst length

[ 41.484686] rkStarting ntpd: _gmac-dwmac fe010000.ethernet eth0: No Safety Features support found

[ 41.484717] rk_gmac-dwmac fe010000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported

[ 41.485369] rk_gmac-dwmac fe010000.ethernet eth0: registered PTP clock

[ 41.485875] IPv6: ADDRCONF(NETDEV_UP): etOK

h0: link is not ready

[ 41.487201] Generic PHY stmmac-0:00: attached PHY driver [GeStarting dropbear sshd: neric PHY] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)

[ 41.489746] dwmac4: Master AXI performs any burst length

[ 41.4OK

89811] rk_gmac-dwmac fe2a0000.etStarting gpsd: hernet eth1: No Safety Features support found

[ 41.489840] rk_gmac-dwmac fe2a0000.ethernet eth1: IEEOK

E 1588-2008 Advanced Timestamp supported

Starting launcher: mac-dwmac fe2a0000.ethernet eth1: registered PTP clock

[ 41.490587] IPv6: ADDRCONF(NETStarting telnetd: DEV_UP): eth1: link is not reOK

ady

Debug: configfs_init

mkdir: cannot create directory '/sys/kernel/config/usb_gadget/rockchip/functions/uac1.gs0': No such file or directory

mkdir: cannot create directory '/sys/kernel/config/usb_gadget/rockchip/functions/uac2.gs0': No such file or directory

[ 41.637036] file system registered

mkdir: cannot create directory '/sys/kernel/config/usb_gadget/rockchip/functions/mtp.gs0': No such file or directory

mkdir: cannot create directory '/sys/kernel/config/usb_gadget/rockchip/functions/rndis.gs0': No such file or directory

[ 41.672877] Mass Storage Function, version: 2009/09/11

[ 41.672919] LUN: removable file: (no medium)

mkdir: cannot create directory '/sys/kernel/config/usb_gadget/rockchip/functions/hid.usb0': No such file or directory

[ 41.730437] read descriptors

[ 41.730498] read strings

Date: 1970-01-01 UTC

[00:00:41.540] weston 8.0.0

https://wayland.freedesktop.org

Bug reports to: https://gitlab.freedesktop.org/wayland/weston/issues/

Build: 8.0.0

[00:00:41.553] Command line: weston --tty=2 --idle-time=0

[00:00:41.558] OS: Linux, 4.19.219, #5 SMP Wed Nov 2 15:02:44 CST 2022, aarch64

[00:00:41.565] warning: XDG_RUNTIME_DIR "/var/run" is not configured

correctly. Unix access mode must be 0700 (current mode is 755),

and must be owned by the user (current owner is UID 0).

Refer to your distribution on how to get it, or

http://www.freedesktop.org/wiki/Specifications/basedir-spec

on how to implement it.

[00:00:41.595] Using config file '/etc/xdg/weston/weston.ini'

[00:00:41.600] Output repaint window is -1 ms maximum.

[00:00:41.605] Loading module '/usr/lib/libweston-8/drm-backend.so'

[00:00:41.612] initializing drm backend

[00:00:41.613] Entering mirror mode.

[00:00:41.619] using /dev/dri/card0

[00:00:41.620] DRM: supports universal planes

[00:00:41.624] DRM: does not support atomic modesetting

[00:00:41.629] fb modifiers disabled

[00:00:41.633] Loading module '/usr/lib/libweston-8/gl-renderer.so'

[00:00:41.642] EGL client extensions: EGL_EXT_client_extensions

EGL_EXT_platform_base EGL_KHR_client_get_all_proc_addresses

EGL_KHR_platform_gbm EGL_KHR_platform_wayland

EGL_EXT_platform_wayland

[00:00:41.677] EGL version: 1.4 Bifrost-"g2p0-01eac0"

[00:00:41.677] EGL vendor: ARM

[00:00:41.679] EGL client APIs: OpenGL_ES

[00:00:41.683] EGL extensions: EGL_WL_bind_wayland_display

EGL_KHR_partial_update EGL_KHR_config_attribs EGL_KHR_image

EGL_KHR_image_base EGL_KHR_fence_sync EGL_KHR_wait_sync

EGL_KHR_gl_colorspace EGL_KHR_get_all_proc_addresses

EGL_IMG_context_priority EGL_KHR_no_config_context

EGL_EXT_image_dma_buf_import

EGL_EXT_image_dma_buf_import_modifiers EGL_EXT_yuv_surface

EGL_EXT_pixel_format_float EGL_ARM_pixmap_multisample_discard

EGL_ARM_implicit_external_sync EGL_KHR_gl_texture_2D_image

EGL_KHR_gl_renderbuffer_image EGL_KHR_create_context

EGL_KHR_surfaceless_context EGL_KHR_gl_texture_cubemap_image

EGL_EXT_image_gl_colorspace EGL_EXT_create_context_robustness

[00:00:41.755] warning: Disabling render GPU timeline and explicit synchronization due to missing EGL_ANDROID_native_fence_sync extension

[00:00:41.767] EGL_KHR_surfaceless_context available

[00:00:41.788] GL version: OpenGL ES 3.2 v1.g2p0-01eac0.a728b64d6b9d8cadf7f54eb4e167984c

[00:00:41.790] GLSL version: OpenGL ES GLSL ES 3.20

[00:00:41.795] GL vendor: ARM

[00:00:41.797] GL renderer: Mali-G52

[00:00:41.801] GL extensions: GL_ARM_rgba8 GL_ARM_mali_shader_binary

GL_OES_depth24 GL_OES_depth_texture

GL_OES_depth_texture_cube_map GL_OES_packed_depth_stencil

GL_OES_rgb8_rgba8 GL_EXT_read_format_bgra

GL_OES_compressed_paletted_texture

GL_OES_compressed_ETC1_RGB8_texture GL_OES_standard_derivatives

GL_OES_EGL_image GL_OES_EGL_image_external

GL_OES_EGL_image_external_essl3 GL_OES_EGL_sync

GL_OES_texture_npot GL_OES_vertex_half_float

GL_OES_required_internalformat GL_OES_vertex_array_object

GL_OES_mapbuffer GL_EXT_texture_format_BGRA8888

GL_EXT_texture_rg GL_EXT_texture_type_2_10_10_10_REV

GL_OES_fbo_render_mipmap GL_OES_element_index_uint

GL_EXT_shadow_samplers GL_OES_texture_compression_astc

GL_KHR_texture_compression_astc_ldr

GL_KHR_texture_compression_astc_hdr

GL_KHR_texture_compression_astc_sliced_3d

GL_EXT_texture_compression_astc_decode_mode

GL_EXT_texture_compression_astc_decode_mode_rgb9e5 GL_KHR_debug

GL_EXT_occlusion_query_boolean GL_EXT_disjoint_timer_query

GL_EXT_blend_minmax GL_EXT_discard_framebuffer

GL_OES_get_program_binary GL_OES_texture_3D

GL_EXT_texture_storage GL_EXT_multisampled_render_to_texture

GL_EXT_multisampled_render_to_texture2

GL_OES_surfaceless_context GL_OES_texture_stencil8

GL_EXT_shader_pixel_local_storage

GL_ARM_shader_framebuffer_fetch

GL_ARM_shader_framebuffer_fetch_depth_stencil

GL_ARM_mali_program_binary GL_EXT_sRGB

GL_EXT_sRGB_write_control GL_EXT_texture_sRGB_decode

GL_EXT_texture_sRGB_R8 GL_EXT_texture_sRGB_RG8

GL_KHR_blend_equation_advanced

GL_KHR_blend_equation_advanced_coherent

GL_OES_texture_storage_multisample_2d_array

GL_OES_shader_image_atomic GL_EXT_robustness

GL_EXT_draw_buffers_indexed GL_OES_draw_buffers_indexed

GL_EXT_texture_border_clamp GL_OES_texture_border_clamp

GL_EXT_texture_cube_map_array GL_OES_texture_cube_map_array

GL_OES_sample_variables GL_OES_sample_shading

GL_OES_shader_multisample_interpolation GL_EXT_shader_io_blocks

GL_OES_shader_io_blocks GL_EXT_tessellation_shader

GL_OES_tessellation_shader GL_EXT_primitive_bounding_box

GL_OES_primitive_bounding_box GL_EXT_geometry_shader

GL_OES_geometry_shader GL_ANDROID_extension_pack_es31a

GL_EXT_gpu_shader5 GL_OES_gpu_shader5 GL_EXT_texture_buffer

GL_OES_texture_buffer GL_EXT_copy_image GL_OES_copy_image

GL_EXT_shader_non_constant_global_initializers

GL_EXT_color_buffer_half_float GL_EXT_color_buffer_float

GL_EXT_YUV_target GL_OVR_multiview GL_OVR_multiview2

GL_OVR_multiview_multisampled_render_to_texture

GL_KHR_robustness GL_KHR_robust_buff er_access_behavior

GL_EXT_draw_elements_base_vertex

GL_OES_draw_elements_base_ve rtex GL_EXT_buffer_storage

GL_EXT_texture_filter_anisotropic

4 GL_ARM_texture_unnormalized_coordinates

2.[00:00:42.108] GL ES 2 renderer features:

3 read-back format: BGRA

wl_shm sub-image to texture: yes

1 EGL Wayland extension: yes

8685] failed to powe[0r0:00 :42.125] event2 - [00:00:42.128] adc-keys: [00:00:42.130] is tagged by udev as: Keyboard

[00:00:42.134] event2 - [00:00:42.1p36] dc-keys: [00:00:42.138] device is a keyboard

cD gen[00:00:42.142] event0 - [00:00:42.144] rk805 pwrkey: [00:00:42.147] is tagged by udev aes: Kreyboiard

[00:00:42.151] event0 - [00:00:42.153] rk805 pwrkey: [00:00:42.156] device is a keyboard

adapter,[00:00:42.160] event3 - [0 :00:42.162] rockchip,rk809-codec Headphones: [00:00:42.166] is tagged by udev as: Switch

1 ret[0r0:00:42.171] event1 - [00:00:42.173] gpio_event: [00:00:42.175] not tagged as supported input device

y left

[ 42.333867] wifi_platform_set_power = 0

[ 42.333887] ======== PULL WL_REG_ON(-1) LOW! ========

[ 42.333894] [WLAN_RFKILL]: rockchip_wifi_power: 0

[ 42.333907] [WLAN_RFKILL]: rockchip_wifi_power: toggle = false

[ 42.333913] [WLAN_RFKILL]: wifi shut off power [GPIO-1-1]

[ 42.333922] wifi_platform_bus_enumerate device present 0

[ 42.333930] ======== Card detection to remove SDIO card! ========

[ 42.333939] mmc3:mmc host rescan start!

[ 42.333986] wifi_platform_set_power = 1

[ 42.333993] ======== PU[00:00:42.226] event1 - not using input device '/dev/input/event1'

LL WL_REG_ON(-1) HIGH! ========

[ 42.334005] [WLAN_RFKILL]: rockchip_wifi_power: 1

[ 42.334013] [WLAN_RFKILL]: rockchip_wifi_power: toggle = false

[ 42.334021] [WLAN_RFKILL]: wifi turn on power [GPIO-1-0]

[00:00:42.259] libinput: configuring device "adc-keys".

[00:00:42.259] libinput: configuring device "rk805 pwrkey".

[00:00:42.264] libinput: configuring device "rockch[ip,r 809-codec Headphones".

42.5[00:00:42.271] DRM: head 'HDMI-A0-1' 3found, connector 152 is disconnected.

741[00:00:42.278] DRM: head 'DSI-1' found, connector 163 is connected, EDID make 'unknown', model 'unknown', serial 'unknown'

rk_[00:00:42.289] Registered plugin APgI 'weston_drm_output_api_v1' of size 24

mac-[00:00:42.297] Chosen EGL config details: id: d 9 rwgba:m 8 8 8 0 buf: 24 dep: 0 stcl: 0 int: 0-1 type: win|pbf|swap_preserved vis_id: XRGB8888 (0x34325258)

[00:00:42.a310]c Out put fDSI-1 (crtc 87) video modes:

720x1280@65.9, preferred, current, 70.0 MHz

[00:00:42.320] associating einput device event2 with output DSI-1 (none by udev)

[00:00:42.328] associating input device event0 with output DSI-21 (none by udev)

[00:00:42.335] associating input device event3 with output DSI-1 (none by udev)

[00:00:42.342] Outaput 0'DSI-1' enabled with head(s) DSI-1

[00:00:42.347] Compositor capabilities:

arbitrary surface rotation: yes

screen capture uses y-flip: yes

present0atio0n clock: CLOCK_MONOTONIC, id 1

presenta0tion clock resolution: 0.000000001 s

.ethernet [00:00:42.370] Loading module '/usr/lib/weston/desktop-shell.so'

eth1: Link is Up - 1Gbps/Full[00:00:42.378] launching '/usr/libexec/weston-keyboard'

- flow control rx/t[00:00:42.385] launching '/usr/libexec/weston-desktop-shell'

x

[ 42.503805] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready

[ 42.638704] wifi_platform_bus_enumerate device present 1

[ 42.638726] ======== Card detection to detect SDIO card! ========

[ 42.638733] mmc3:mmc host rescan start!

sh: write error: No such device

Starting linuxptp daemon: OK

Starting linuxptp system clock synchronization: OK

Starting dnsmasq: OK

Trying to reconnect Wifi

Starting input-event-daemon: input-event-daemon: Start parsing /etc/input-event-daemon.conf...

input-event-daemon: Adding device: /dev/input/event0...

input-event-daemon: Adding device: /dev/input/event1...

input-event-daemon: Adding device: /dev/input/event2...

input-event-daemon: Adding device: /dev/input/event3...

input-ev[ent-daemon: Start listening on 4 devices...

done

42.832386] Freeing drm_logo memory: 732K

[root@RK356X:/]# could not load cursor 'dnd-move'

could not load cursor 'dnd-move'

could not load cursor 'dnd-copy'

could not load cursor 'dnd-copy'

could not load cursor 'dnd-none'

could not load cursor 'dnd-none'

QStandardPaths: wrong permissions on runtime directory /var/run, 7755 instead of 7700

QLauncher available size : 720 x 1280

libpng warning: iCCP: known incorrect sRGB profile

libpng warning: iCCP: cHRM chunk does not match sRGB

rga_api version 1.3.1_[11] (RGA is compiling with meson base: $PRODUCT_BASE)

xkbcommon: ERROR: couldn't find a Compose file for locale "zh_CN.utf8"

could not create XKB compose table for locale 'zh_CN.utf8'. Disabiling compose

xkbcommon: ERROR: couldn't find a Compose file for locale "zh_CN.utf8"

could not create XKB compose table for locale 'zh_CN.utf8'. Disabiling compose

[ 43.755442] rk3x-i2c fe5e0000.i2c: timeout, ipd: 0x00, state: 2

[ 44.662679] failed to power up DHD generic adapter, 0 retry left

[ 44.678784] wifi_platform_set_power = 0

[ 44.678807] ======== PULL WL_REG_ON(-1) LOW! ========

[ 44.678815] [WLAN_RFKILL]: rockchip_wifi_power: 0

[ 44.678828] [WLAN_RFKILL]: rockchip_wifi_power: toggle = false

[ 44.678834] [WLAN_RFKILL]: wifi shut off power [GPIO-1-1]

[ 44.678840] wifi_platform_bus_enumerate device present 0

[ 44.678845] ======== Card detection to remove SDIO card! ========

[ 44.678851] mmc3:mmc host rescan start!

[ 44.678856] failed to power up DHD generic adapter, max retry reached**

[ 44.678862] unregister wifi platform drivers

[ 44.678867] wifi_platform_bus_enumerate device present 0

[ 44.678871] ======== Card detection to remove SDIO card! ========

[ 44.678882] mmc3:mmc host rescan start!

[ 44.678892] ======== dhd_wlan_deinit_plat_data ========

[ 44.678902] dhd_module_init: Failed to load the driver, try cnt 0

[ 44.678945] dhd_module_init: Failed to load driver max retry reached**

[ 44.678956] dhd_module_init: Exit err=-19

[ 44.768923] rk3x-i2c fe5e0000.i2c: timeout, ipd: 0x00, state: 1

[ 45.782083] rk3x-i2c fe5e0000.i2c: timeout, ipd: 0x00, state: 2

[ 46.795423] rk3x-i2c fe5e0000.i2c: timeout, ipd: 0x00, state: 1

[ 71.542295] vcc3v3_pcie: disabling

[ 71.542380] vcc3v3_lcd1_n: disabling

[00:01:42.681] Warning: computed repaint delay is insane: -58216 msec